Pages

Showing posts with label cedar. Show all posts
Showing posts with label cedar. Show all posts

Friday, May 6, 2011

Deck Rebuild

Just in time for the rain.


 Old deck is a bad combination of poor construction, untreated lumber and inappropriate finish -- black paint! Plus it is about 30 years old.

 I sawed off the deck's unsightly roof.   The deck roof was attached to the house roof extension over slider.   Probably will need some rebuild there too...noticed one corner is damaged from ice-dam issues.


New stairs will drop onto deck boards to cover cement pad.





Nasty, hunh?




Sawed off the deck roof.  Boy this is ugly.






 
 
Deck materials ready
     New deck will be pressure-treated structural members and cedar decking/rails.   We were planning to use stainless steel cable in horizontal orientation instead of the vertical balusters to improve visibility of creek and yard.  However stainless fittings are too expensive for normal people. Next best idea--galvanized electrical conduit, at $2 / 10 ft section.

Cedar will be sealed and stained with  Redwood semi-transparent SuperDeck.    Underneath, I will lay 8x16 concrete tiles to give a clean, mud-free spot for storage.




400 sq ft stained

OK, now to the destruction phase...



An evening with Mr Sawzall and Mrs Sweat---and the deck disappeared.








New deck taking shape.



Halfway done with the deck.  Time for breakfast !










Lower deck done, ready for stairs

New 40" wide stairs
















June 12 - Crabapple tree in full bloom




Wednesday, August 5, 2009

Canoe number two

Building another Prospector 16. I really like the one I made a few years ago and I have the forms, so why not?

I got a beautiful yellow cedar plank from a friend who bought several from a sawmill in Canada--old growth trees reclaimed from the bottom of a lake. Now I'm ready to start making strips.

First job is to rip the 1 in. blocks off the big board. I made a long series of supports by screwing rollers to my cabinet saw table, workbench, another table saw and finally a couple of outfeed supports. What a funny picture !


After all that, the Grizzly kept overloading the circuit, so rather than mess around with it, I sold it and made a mobile base for the Unisaw. Made enough money selling tools on Craigslist that I can get a couple of GripTite magnetic featherboards and a Kreg Precision Miter System.


Well, I rearranged the shop and turned the Unisaw around 180 degrees. Cutting the plank on the big Unisaw was easy and I got the strips all ripped in 2 days. When I get a spare day, I will do the bead and cove thing and we'll be ready to make a canoe!